Crimping

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

Locator D-Sub turned standard contacts

for single D-Sub standard contacts

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

Crimptool Opening

for crimp barrel and crimp flange

Locator Set Han D/E/C, for Crimping tool

Spare part, Han D®, Han E®, Han® C

Crimp die 10mm² for 60 kN tool

for 60 kN toolConductor cross-section: 10 mm²

Locator-Set Han E / Han D

Spare part, Han D®, Han E®

Crimp die 25mm² for 60 kN tool

for 60 kN toolConductor cross-section: 25 mm²

Crimp die 16mm² for 60 kN tool

for 60 kN toolConductor cross-section: 16 mm²

Go / no-go gauge for 09990000888

for crimping tool 09 99 000 0888, for optional testing

D SUB HD SERVICE CRIMP TOOL

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

Hand hydraulic crimping tool 60 kN

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

Locator D-Sub für. 0501 (Gigabit Modul )

for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476

Crimp die 35mm² for 60 kN tool

for 60 kN toolConductor cross-section: 35 mm²

Set Han C (4-10 mm²) f. 0990

for part number 09 99 000 0990, Han® C: 4 ... 10 mm², incl. locator