Han 1A-12-c-f latch

Article No.: 09 10 012 3101

Configurable

Image is for illustration purposes only. Please refer to product description.

Configurable

Inserts

Article No.: 09 10 012 3101

to see prices and availability.

to see prices and availability.

Inserts

Crimp termination

Female

Polyamide (PA)

RAL 9005 (jet black)

Rated current: ‌6.5 A

Size: 1 A

Contacts: 12

Conductor cross-section: 0.09 ... 0.52 mm²

Snap-in latches

Identification

Category	Inserts
Series	Han® 1A

Version

Termination method	Crimp termination
Locking type	Snap-in latches
Gender	Female
Size	1 A
With wire protection	No
Number of contacts	12
PE contact	No
Details	Please order crimp contacts separately.
Details	Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details	A Han^® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
	Contact inserts must not be coupled or decoupled under electrical load.
	Connector must not be powered-up in the unmated condition.

Technical characteristics

Conductor cross-section (mm²)	0.09 ... 0.52 mm²
Rated current	6.5 A
Rated voltage	50 V
Rated impulse voltage	0.8 kV
Pollution degree	3
Rated voltage acc. to UL	30 V
Rated current acc. to UL	5 A AWG 20
Insulation resistance	>10⁸ Ω
Limiting temperature	-40 ... +90 °C
Mating cycles	100
Degree of protection acc. to IEC 60529	IP20

Material properties

Fire protection on railway vehicles	EN 45545-2 (2020-08) + A1 (2023-10)
China RoHS	e
RoHS	compliant
REACH SVHC substances	Not contained
REACH Annex XVII substances	Not contained
REACH ANNEX XIV substances	Not contained
Requirement set with Hazard Levels	R22 (HL 1-3)
Requirement set with Hazard Levels	R23 (HL 1-3)
ELV status	compliant
California Proposition 65 substances	Not contained
Material (insert)	Polyamide (PA)
Colour (insert)	RAL 9005 (jet black)
Material (seal)	NBR
Colour (seal)	Black
Material flammability class acc. to UL 94	V-0

Specifications and approvals

UL / CSA	UL 1977 ECBT2.E235076
	CSA-C22.2 No. 182.3 ECBT8.E235076
	Please contact your local HARTING subsidiary for further information.
Approvals	DNV GL
Specifications	EN 45545-2 Fire protection on railway vehicles
	IEC 61373 Category 1 Class B
	IEC 60664-1
	IEC 61984

Commercial data

European customs tariff number	85389099
Packaging size	1
Net weight	6.7 g
Country of origin	Germany
GTIN	5713140185661
eCl@ss	27440205 Contact insert for industrial connectors
ETIM	EC000438
UNSPSC 24.0	39121522