Inserts
Crimp termination
Male
Polyamide (PA)
RAL 9005 (jet black)
Rated current: 0.5 A
Size: 1 A
Contacts: 8 + shielding
Conductor cross-section: 0.08 ... 0.25 mm²
Single locking lever
Product details
Category
Inserts
Series
Han® 1A
Termination method
Crimp termination
Locking type
Single locking lever
Gender
Male
Size
1 A
Shielding
With cable tie
With wire protection
No
Number of contacts
8
further contacts
+ shielding
PE contact
No
Details
Please order crimp contacts separately.
Please order locking lever separately.
Order separately the hoods/housings for an IP65 performance.
Contact insert not compatible with 09 10 000 0800 (bulkhead mounted housing, angled)
Details
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Connector must not be powered-up in the unmated condition.
Conductor cross-section (mm²)
0.08 ... 0.25 mm²
Rated current
0.5 A
Rated voltage
48 V
Rated impulse voltage
0.8 kV
Pollution degree
3
Insulation resistance
>108 Ω
Limiting temperature
-40 ... +90 °C
Mating cycles
100
Degree of protection acc. to IEC 60529
IP20
Transmission characteristics
Cat. 6A Class EA up to 500 MHz
Data rate
10 Mbit/s
100 Mbit/s
1 Gbit/s
2.5 Gbit/s
5 Gbit/s
10 Gbit/s
ECHA SCIP number
5dbb3851-b94e-4e88-97a1-571845975242
Fire protection on railway vehicles
EN 45545-2 (2020-08) + A1 (2023-10)
China RoHS
50
RoHS
compliant with exemption
REACH SVHC substances
Yes
REACH Annex XVII substances
Not contained
REACH ANNEX XIV substances
Not contained
Requirement set with Hazard Levels
R22 (HL 1-3)
R23 (HL 1-3)
ELV status
compliant with exemption
California Proposition 65 substances
Yes
RoHS exemptions
6(c): Copper alloy containing up to 4 % lead by weight
China Mainland